Table of Contents
Advertisement
OPERATIONAL MODES
ON/LOW mode: Press the Power/Mode switch once. All 3 LEDs will turn
on.
HIGH mode: From LOW mode, press the Power/Mode Switch once. All 3
LEDs will increase in brightness. From HIGH mode press once more to
turn headlamp OFF .
NOTE: All P/Ns listed above will power OFF after HIGH mode. When ON (for all
modes), the rear LED (located on Battery Pack) will flash.
DISCOVER TIL T & LO•PRO BATTERY LIFE
MODE
HIGH POWER
LOW POWER
*Battery life may vary according to mode selected, battery quality & type, and prevailing
ambient conditions.
MAINTENANCE
BATTERY CORROSION
Battery leakage may cause corrosion to build inside the Battery Pack, causing
the light not to function properly . In case of corrosion, please follow the
suggested steps below:
1
1.
Remove the batteries from the Battery Pack.
2
2.
Make a mixture of 50% vinegar and 50% water. Then, pour the mixture into
the Battery Pack and let it soak for five (5) minutes.
3.
3
Drain the mixture from the inside the Battery Pack. Dry the inside of the
Battery Pack (make sure no liquid residue is left inside Battery Pack).
4
4.
Re-install all four (4) batteries. Test the light's performance.
5.
5
Secure the Battery Pack Cover by snapping all six (6) Battery Pack Tabs.
NOTE: Corrosion from leaking batteries is NOT covered by the warranty .
6
BATTERY LIFE
5 hours
12 hours
LUMENS
200
54
Advertisement
Table of Contents
