Windows Nt Event Log Messages - D-Link DFE-570TX Setup Manual

Windows NT Event Log Messages

The load balancing software will report all adapter errors and state changes to the
NT Event Log. To view messages in the Event Log, use the Event Viewer supplied by
NT. Examples of all the events generated are shown below:
Downed Adapter:
The adapter <Adapter Name> in <Array Name> has lost network
connectivity and has been removed from the Array.
Array has only one remaining Adapter:
There is only one functioning adapter in <Array Name> left.
All Adapters in Array are down:
All adapters in <Array Name> are down; therefore, users on
this segment can no longer communicate to this computer.
Failed Adapter comes online again:
The adapter <Adapter Name> in <Array Name> has regained
network connectivity and has been inserted back into the
Array.
Adapter has failed multiple times and is permanently removed:
The adapter <Adapter Name> in <Array Name> has lost network
connectivity and has been removed from the Array.
has gone down <###> times in the past <###> minutes;
therefore, the adapter will not be put back into the array.
It is advisable that you investigate the cause of the lost
connections and possibly replace the adapter or cable.
D-Link Corporation
Setup Guide
The adapter
Page - 18 -