Using Additional Bases; Registering Your Bt Studio 1100; Handset To Another Base - BT STUDIO 1100 User Manual

Using additional bases

40
IMPORTANT
You can only register your BT
Studio 1100 handset to another
base if it is GAP compatible.
You will not be able to register
your BT Studio 1100 handset to a
BT Studio or BT Studio 500 base
as these products are not GAP
compatible.
Your BT Studio 1100 handset can be registered to up to
4 other bases.
Registering your BT Studio 1100 handset to
another base
On the base:
1. Press and hold
Page
mode.
The base beeps and the In use light flashes while the
handset is being registered.
On the handset:
2. Press .
Menu
3. Press or until
Vol
4. Press or until
Vol
press .
Menu
5. BASE 1 2 3 4 will be displayed.
The base that you are currently registered to will flash.
6. Enter the number of the base you want to register to.
SEARCH 1
is displayed (where 1 is the base number you
are searching for).
to put the base into registration
REGISTER is displayed then press
REG BASE is displayed then
.
Menu