Adapter Function Test - D-Link DFE-550TX User Manual

Ethernet / fast ethernet adapter for pci bus with wol

Hide thumbs Also See for DFE-550TX:

Table of Contents

steps:

Adapter Function Test

Insert the DFE-550TX Software CD-ROM in an available

drive (here shown as CD-ROM drive ). At the DOS prompt

(here shown as >), key in:

and <RETURN>.

The opening screen of the Verification/

Diagnostic program will appear.

NOTE:

Read the

README.TXT

choose the appropriate diagnostic program for

your operating system.

Review the reported configuration data before proceeding to

Step 3.

The Configuration Data screen also features a Diagnostic

Menu. Follow the cues at the foot of the screen to select

and run the Adapter Basic Diagnostic program.

adapter function test results will appear onscreen. In the

Loopback test, test signals are intercepted and reflected at

the MAC level without reaching the network cable. If the

results are normal, then go ahead to the Network Operation

test, starting with Step 4.

D-Link DFE-550TX Adapter

DIAG.EXE

, on the CD-ROM, to

The

Table of Contents