Initial Setup - Samsung HG43NJ690U Install Manual

04 Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
If you already completed the Initial Setup, run the Initial Setup again using the following menu.
• Hotel Option (MUTE > 1 > 1 > 9 > SelectE) > System > TV Reset
If you select TV Reset, the TV resets all values to their factory defaults. When the TV turns off, press the POWER button
on the remote control to turn on the TV. The TV starts the Initial Setup.
• The image on your TV may differ from the image above depending on the model and geographical area.
Region Settings
Change the region settings if you are located in North America, Latin
America, or Europe. Your TV might not function if the region settings are not
correctly configured. When the region settings are changed, your TV will
automatically restart to apply them.
1
US
SD_MEXICO
SD_CANADA
CARRIBE
Welcome to Samsung TV!
Select your language to start the on screen setup.
2
Bienvenue!
Welcome!
Bienvenido!
TV installation Type
Select your TV installation type.
3
TV Basic Setup
Cloning Mode
Factory Menu
1
2
Configure Your TV
Set basic options to use your TV.
4
Picture Mode Standard
Previous 2
Scan Channels
Scanning for channels...
5
DTV Air
DTV Cable
Air
Cable
Stop
Next
Select the region settings
Country List
• Before select region, refer to the country list information on the right.
United State of America
• If you select the incorrect region, execute TV Reset again after the Initial Setup is
completed.
• If the region is changed, the TV automatically turns off and on.
Next
Selecting your language
Use the Up and Down buttons to change the You can change the menu language.
language.
Next
Selecting your TV installation type
• TV Basic Setup: Select to proceed to the next step to set the basic options for
using your TV.
Start basic setup to use your TV.
• Cloning Mode: Copy the system settings from the USB or server to the TV.
• Factory Menu: End Initial Setup and go to Hotel Option menu directly.
Next
3
Setting basic options for using your TV
• Picture Mode: You can select the picture mode that provides the best viewing
Select the picture mode that best suits your
experience.
viewing environment.
Next
3
Scanning Channel
• After channel sanning is completed, select Next or press the right directional
button on the remote control.
• When the RF cable is not connected, this step is skipped.
English - 18