Connections; Connecting The Tv To An Sbb Or Stb - Samsung HG43NJ670U Install Manual

06 Connections

Connecting the TV to an SBB or STB

STB (SBB)
ETH MODEM
Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable.
• The ETH MODEM jack name that you connect the Data Cable to may differ depending on the SBB or STB type.
• The remote control IR signal need to meet the following specification to use IR pass through function.
IR signal reciever specification
– Band pass filter center frequency: 37.9 ㎑
– Carrier Frequency, Duty 50%
– Minimum Burst Length (tburst): 12 pulses (316 us)
– Minimum Gap Time Between the burst (tburst gap): 16 pulses (422 us)
– Minimum Gap Time between the data commands (tpause): 25 ㎳
Data Cable
English - 20
TV Rear Panel