Troubleshooting - D-Link Air DCF-650W Manual

Troubleshooting

Tips to Configure Your PDA for accessing the Internet
To Configure the following:
The Access Point's ESSID
WEP keys (if required)
DHCP/Fixed IP (under IE
browser)
IP Addresses for device,
Proxy server (under IE
browser)
If DNS, WINS is needed
(most IP addresses are
automatically assigned.)
After you shut down your PDA, "power on" the PDA again. It will open to the last
application in use when it was "shut down." If you are unable to navigate out of the
"utility" program, you may use the PDA's reset button to terminate the program.
You can activate it again when needed.
If your wireless connection to the Access Point gets disconnected for any reason,
you can reset and force a connection request by going to the utility program,
selecting "Configure," checking parameters, then selecting "Modify" to force a
re-scan.
If your device roams to a new Access Point which is in a different subnet, you may
need to do one or both of the following: (1) Unplug and re-insert the Wireless LAN
Compact Flash Adapter, or (2) Hard reset your device to force a "release and renew"
of a re-assignment of the IP address in a DHCP Access Point environment.
Go to:
Settings>System>Wireless LAN
Setting>Configure
Settings>System>Wireless LAN
Settings>WEP
Setting>Connections>Network (select the
Wireless LAN CF Card. Set the IP Address
and Name Servers accordingly.)
Tools>Options>Connections (enter desired
Proxy's IP address and port#.)
(Under IE browser) Tools>Internet
Options>Connections (enter desired Proxy
address and port #.)
13