Procedure For Copying (Sc-T5400M Series) - Epson SC-T5400 SERIES Operator's Manual

Procedure for Copying
(SC-T5400M Series)
Load the original.
A
U "Loading an Original for Copying/
Scanning (SC-T5400M Series)" on page 14
Do the settings for copying.
B
In Basic Settings, set the Color, Quality, Density, and
Reduce/Enlarge.
Do the settings from Advanced when you are doing
detailed settings, such as the Original Type.
Set the number of copies.
C
This section explains the procedure
for copying after the original is
loaded.
Touch the Copy button to start scanning the
D
original.
Remove the original when scanning is
E
complete.
While holding the original, touch the OK button on
the screen, and then remove the original.
Printing starts when the original has been completely
removed.
If you want to eject the original, without holding it at the
eject slot, after it has been scanned, set the following on
the printer's menu.
Settings - General Settings - Scan Settings - Scan
Options - Confirm Before Ejecting Scanned Document
- Off
15