PA 4PMC5000 User Manual page 10

C. To secure lower sash in place, attach right angle sash
lock with 3/4" (19 mm) or 1/2" (12.7 mm) screw as
shown (Fig. 9).
D. Cut window sash seal foam and insert it in the space
between the upper and lower sashes (Fig. 10).
7
Foam Seal
IF AC IS BLOCKED BY A
STORM WINDOW
Add wood as shown in Fig.11, or remove storm window
before air conditioner is installed.
If storm window frame must remain, be sure the
drain holes or slots are not caulked or painted shut.
Accumulated rain water or condensation must be
allowed to drain out.
FIG. 11
Storm window
frame or other
obstruction.
REMOVING AC FROM WINDOW
● Turn AC off, and disconnect power cord.
● Remove sash seal from between windows, and
unscrew safety sash lock.
● Remove screws installed through frame and
frame-lock.
● Close (slide) side accordion panels into frame.
● Keeping a firm grip on air conditioner, raise sash and
carefully remove.
● Be careful not to spill any remaining water
while lifting unit from window. Store parts WITH
air conditioner.
Sash
1½" min
(38 mm) Board thickness
as required, for
proper pitch to
rear, along entire
sill. Fasten with
nails or screws.