Advertisement
Table of Contents
Figure 1: Front View
Heated fluid flows out through
coolant hose from heat exchanger
to radiator
Fluid flows in through input coolant
hose from engine to lower barb
Figure 2B: Back View with mounting
tabs on top.
I – C2 - 092214
WORK READY™ Auxiliary Heater
Model WR20000 | Part No. EXE-100-003
High/Haut
Low/
Medium/Moyen
Figure 2A: Back View with mounting tabs on bottom.
( - )
( - )
Medium/Moyen
Basse
Low/
Basse
( - )
( - )
Power Source
High/Haut
Figure 3: Three
Speed Fan Switch
(sold separately)
Heated fluid flows out through
coolant hose from heat exchanger
to radiator
Fluid flows in through input
coolant hose from engine to lower
barb
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Aqua-Hot WORK READY WR20000
Summary of Contents for Aqua-Hot WORK READY WR20000
- Page 1 WORK READY™ Auxiliary Heater Model WR20000 | Part No. EXE-100-003 Figure 1: Front View Figure 2A: Back View with mounting tabs on bottom. Heated fluid flows out through coolant hose from heat exchanger to radiator Fluid flows in through input coolant hose from engine to lower barb ( - ) ( - )
- Page 2 3. Connect wires of Auxiliary Heater (Heat Exchanger). It is recommended to install an inline fuse holder with a 5amp fuse. (Sold by Aqua-Hot: Fuse Holder Part No. ELX-200-130, 5 amp Fuse Part No. ELX-200-140). Three speed fan switch sold separately (Sold by Aqua-Hot: Part No. ELX-100-001).
Need help?
Do you have a question about the WORK READY WR20000 and is the answer not in the manual?
Questions and answers