Advertisement
Figure 1: Front View
Heated fluid flows out through
coolant hose from heat exchanger
to radiator
Fluid flows in through input coolant
hose from engine to lower barb
Figure 2B: Back View with mounting
tabs on top.
I – C2 - 092214
WORK READY™ Auxiliary Heater
Model WR13000 | Part No. EXE-100-002
Figure 2A: Back View with mounting tabs on bottom.
( - )
( - )
Medium/Moyen
Basse
Low/
Figure 3: Three
Speed Fan Switch
(sold separately)
Power Source
High/Haut
Heated fluid flows out through
coolant hose from heat exchanger
to radiator
Fluid flows in through input
coolant hose from engine to lower
barb
Advertisement
Table of Contents
Related Manuals for Aqua-Hot WORK READY WR13000
Summary of Contents for Aqua-Hot WORK READY WR13000
- Page 1 WORK READY™ Auxiliary Heater Model WR13000 | Part No. EXE-100-002 Figure 1: Front View Figure 2A: Back View with mounting tabs on bottom. Heated fluid flows out through coolant hose from heat exchanger to radiator Fluid flows in through input coolant hose from engine to lower barb ( - ) ( - )
- Page 2 Note: It is recommended to install an inline fuse holder with a 5amp fuse. (Sold by Aqua-Hot: Fuse Holder Part No. ELX-200-130, 5 amp Fuse Part No. ELX-200-140). Three speed fan switch sold separately (Sold by Aqua-Hot: Part No. ELX-100-001).
Need help?
Do you have a question about the WORK READY WR13000 and is the answer not in the manual?
Questions and answers