D-Link AirPro DI-764 Manual page 33

Using the Configuration Menu
Remote Management
Remote Management allows the DI-764 to be configured from the Internet by a web
browser. A username and password is still required to access the Web-Management
interface. In general, only a member of your network can browse the built-in web
pages to perform "Administrator" tasks. This feature enables you to perform
"Administrator" tasks from the remote (Internet) host.
IP Address: Internet IP address of the computer that has access to the Router. It is
not recommended that you set the IP address to * (star), because this allows any
Internet IP address to access the Router, which could result in a loss of security for
your network. If you elect to enable Remote Management, make sure to enter the
IP Address of the remote computer allowed to configure the DI-764.
Port: For security purposes, select a separate port number used to access the
Router. (The following is an example only; you may use a different port number.)
Example: http://x.x.x.x:8080
and 8080 is the port used for the Web-Management interface.
Tools > Time
Time settings-
Default
NTP Server-
where x.x.x.x is the WAN IP address of the Router
in this window you can choose the time zone; set the time;
and enable or disable Daylight Savings Time.
NTP is short for Network Time Protocol. NTP synchronizes com-
puter clock times in a network of computers.
This field is optional.
33