D-Link AirPro DI-764 Manual page 21

Using the Configuration Menu
Advanced > Virtual Server continued
The DI-764 is also capable of port-redirection meaning incoming traffic to a particular
port may be redirected to a different port on the server computer.
Each virtual service that is created will be listed at the bottom of the screen in the
Virtual Servers List. There are pre-defined virtual services already in the table. You
may use them by enabling them and assigning the server IP to use that particular
virtual service.
Virtual Server-
Name-
Private IP-
Protocol Type-
Private Port-
Public Port-
Schedule-
Apply-
Example #1:
If you have a Web server that you wanted Internet users to access at all times, you
would need to enable it. Web (HTTP) server is on LAN (Local Area Network)
computer 192.168.0.25. HTTP uses port 80, TCP.
Name: Web Server
Private IP: 192.168.0.25
Protocol Type: TCP
Private Port: 80
Public Port: 80
Schedule: always
select Enabled or Disabled
enter the name referencing the virtual service
the server computer in the LAN (Local Area Network) that will
be providing the virtual services.
the protocol used for the virtual service
the port number of the service used by the Private IP computer
the port number on the WAN (Wide Area Network)side that will
be used to access the virtual service.
The schedule of time when the virtual service will be
enabled. The schedule may be set to Always, which will
allow the particular service to always be enabled. If it is set to
Time, select the time frame for the service to be enabled. If
the system time is outside of the scheduled time, the service
will be disabled.
click Apply to save the changes.
21