Using the Configuration Menu
Advanced > Filters > MAC Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network)
computers by their MAC addresses from accessing the Internet. You can either
manually add a MAC address or select the MAC address from the list of clients that
are currently connected to the Broadband Router.
Filters-
MAC Filters-
Name-
MAC Address-
DHCP Client-
Apply-
select the filter you wish to use; in this case, MAC filters was
chosen.
choose Disable MAC filters; allow MAC addresses listed be-
low; or deny MAC addresses listed below.
enter the name here.
enter the MAC Address.
select a DHCP client from the pull-down list; click Clone to copy
that MAC Address
click Apply to save the changes.
26