Controls And Connection; The Front Panel; The Manual Splitter Controls - Viscount Chorale 3 User Manual

Owner's Manual

2.1 THE FRONT PANEL

The front panel above the two manuals contains the stops, arranged section by section, used to activate
the organ's registers.
1
1. [PEDAL] section: this section contains the pedal board register stops. The following couplers are
also provided:
o [Great to Pedal]: the stops of the Great will also play on the pedal board.
o [Swell to Pedal]: the stops of the Swell will also play on the pedal board.
2. [GREAT] section: contains the stops and tremolo of the Great and the tremulant:
o [Swell to Great]: the stops of the Swell will also play on the Great.
3. [SWELL] section: Swell stops and tremulant.

2.2 THE MANUAL SPLITTER CONTROLS

The pistons of the adjustable combinations, Tutti and other accessory functions are placed in the areas
between the manuals.
MIDI MIDI MIDI
S
P G SW
3 9
1. General combinations: this section contains the instrument's general adjustable combinations.
When a combination is recalled, the light of the relative stop illuminates to confirm its activation.
The [NEXT] pistons can also be used to select combinations one by one in an upward direction and
[PREV.] for the same function in a downward direction (combination sequencers).
There is also a piston marked [HR] (Handle Registers) beside the general and dedicated combinations;
lso known as 0, when it is on it automatically memorises the register status. This piston's main
function is to restore, during use of the combinations, the "hand-made" stop setup created when the
[HR] button was on.
2. CONTROLS AND CONNECTIONS
PREV NEXT HR 1
4
2
2 3 4 5 6
1
5
Viscount Chorale 3
3
Chorale 3
A.P ENC T
8 5 6
C
10