Viscount Chorale 3 User Manual page 22

Viscount Chorale 3
Owner's Manual
You can scroll through all the registers using the [VALUE +] and [VALUE -] buttons or by pressing the
stops themselves.
Once you have checked the labels of all the stops, press [EXIT] to return to display of the VOICES menu.
CHANGING LABELS
As we have seen, once you have selected a style or loaded replacement voices it may be necessary to
change the labels of the stops, since several voices will have changed and the name of the stop will no
longer correspond to the name of the register and voice loaded in the memory.
However, it is very easy to change the labels because they are just pressed into the stop. Remove the label
with your fingers or using a small screwdriver (as shown below) and fit the correct one. In order to buy
new register name plates, get in touch with your dealer.
20