The Connections Underneath The Manuals - Viscount Chorale 3 User Manual

Owner's Manual

2.5 THE CONNECTIONS UNDERNEATH THE MANUALS

In the left of the organ, under the surface which contains the manuals and side panels, there is a small
recess containing various connectors for connecting the organ to remote sound and MIDI devices.
1. [HEADPHONES] connector: Jack socket to which a headphone set can be connected. With
headphones connected, the organ's internal amplification is cut off.
N.B.
To obtain the best results from the [HEADPHONES] output, phones with impedance of at least 16 Ω
should be used.
2. [MIDI] connectors: five-pin DIN connectors for connection of instruments with MIDI interface.
The [IN] connector allows receipt of MIDI data generated by remote MIDI sources, the [OUT]
connector transmits the MIDI messages generated by the Chorale 3, and the [THRU] connector
transmits the MIDI data exactly as received at the [IN] connector.
3. [INPUT] connectors: RCA line inputs which allow other instruments to be played using the organ's
internal amplification. If the source is monophonic use the L(MONO) connector only.
4. [OUTPUT] connectors: RCA line outputs for the unamplified signal, for connection of optional
amplified speakers, remote amplification systems or recording systems. To use a monophonic signal,
connect to the [L/(MONO)] connector only.
1 2
THRU OUT
HEADPHONES MIDI
3 4
IN L(MONO) R L(MONO) R
INPUT OUTPUT
9
Viscount Chorale 3