Table of Contents
Advertisement
Information about
sensor features
The garage door sensor utilizes an
accelerometer to detect its orientation.
Please read the following information
before deciding where to install the
garage door sensor.
Note:
R The sensor is not designed to be
used in situations that require high
reliability. We do not recommend
use of the sensor in these situations.
R Panasonic takes no responsibility for
any injury or damage caused by the
use of the garage door sensor.
Compatible garage doors
section-type
How an open door is detected
The sensor is installed by mounting it to
the interior-side of your garage door. It
should be mounted in such a way that
it is perpendicular to the ground when
the garage door is closed, and is tilted
when the garage door is opened.
When the garage door has opened far
enough to tilt the sensor beyond the
detection threshold (page 17), the
sensor is triggered.
Note:
R The sensor is not triggered if the
door is opened slightly.
For assistance, visit www.panasonic.ca/english/support
HNS107C_(en_en)_0212_ver.011.pdf
Vertical
Swing-up type
11
Vertical section-type
A
B
Swing-up type
A
B
Door closed
As door opens, sensor is triggered
Door fully open
Setup
C
C
11
2016/02/12
9:35:26
Advertisement
Table of Contents
