Lan Connection Problems - D-Link DI-714 User Manual

The NAT table is full.
Resolution:
Reboot the Broadband Router by turning the power to the unit off and
then on again. Some types of hacker tools use very non-standard data
streams. Some of these streams may cause the Broadband Router to
lock up. When the Broadband Router locks up, it will not affect the
computers attached to it. You may need to restart the client computers
to regain Internet access.
Although sometimes inconvenient, a lock-up is an indication of an
attack. Part of the design of the Broadband Router is to act as a decoy
for such traffic. If your computer is locked up instead you may have
lost changes to open, unsaved files, lost data, or corrupted your
operating system or hard drive.
If you are currently experiencing frequent lock-ups, you may wish to
upgrade the firmware.

LAN Connection Problems

I can't access my Broadband Router.
Cause:
The unit is not turned on.
There is not a network connection.
The computer you are using does not have a compatible IP Address.
Resolution:
Make sure your Broadband Router is turned on.
Make sure that there is a physical connection between your computer
and the Broadband Router and that the Link light is on.
43