Performing A Factory Reset - D-Link DI-714 User Manual

"Introduction to Wireless Networking" for tips to help make a good
connection.
Check your IP Address to make sure that it is compatible with the
Wireless Broadband Router. The default IP Address of the Wireless
Broadband Router is "192.168.0.1". A compatible IP Address would be
"192.168.0.50"

Performing a Factory Reset

To perform a Factory Reset using the Reset button on the back of the
DI-714 do the following:
Press and hold the Reset button with a pen or paper clip for 3 seconds.
A Factory Reset can also be performed through the web configuration
interface. Follow these steps to perform a factory reset using the web
configuration interface.
1. Log-in to the DI-714 web configuration interface.
2. Click on the System Tools link at the bottom of the screen.
3. Click on Load Default Settings.
4. You will be asked if you want to restore to default settings. Click
OK to restore settings to default configuration or click Cancel.
48