Related Manuals for KRAFTWERK 38123
Summary of Contents for KRAFTWERK 38123
- Page 1 Instruction Manual Hydropneumatic shop press 50 T Art. 38123 www.KRAFTWERKtools.com...
- Page 2 SAFETY INSTRUCTIONS PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS AND WARNINGS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE OF WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE TO PROPERTY AND/OR SERIOUS PERSONAL INJURY. PLEASE KEEP THIS INSTRUCTION MANUAL SAFE FOR FUTURE USE.
-
Page 3: Maintenance
BEFORE FIRST USE a) Before first use of this product, purge away air from the hydraulic system: open the release valve by turning it counterclockwise. Pump several full strokes to eliminate any air in the system. b) Check all parts and conditions, if there is any part broken, stop using it and contact your supplier immediately. - Page 4 PART LIST SHOP PRESS PUMP PARTS LIST Description Knob Pin 5X24 Release valve O-Ring Barl valve Handle bracket Joint pole Pole seat Piston J-ring Pump housing Base Bolt M8X12 Spring Ball valve Ball seat Spring safety valve Screw safety Nut M8 Cover O-Ring Reservoir...
-
Page 5: Part List
PART LIST Use the exploded drawing as your guide to assemble. Lay all parts and assemblies out in front of you before beginning. -
Page 6: Product Description
No. Description No. Description No. Description No. Description Base support Connector pipe Washer 10 Straight connector Foot pedal air on/off Connector Handle Nut bolt M8x12 Air pipe Upper frame Handle sleeve Washer 8 Support beam A Press cylinder Washer 12 Screw Bed frame pin Cylinder pipe... -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY 38123 Model: Hydropneumatic shop press 50 T KRAFTWERK Sàrl, 25 rue due Stade, F-67870 Bischoffsheim Declares under sole responsibility that the product to which this declaration relates is in conformity with the following standard(s) or other normative document(s):... - Page 8 KRAFTWERK Europe AG KRAFTWERK Sàrl. Mettlenbachstrasse 23 25, rue du Stade CH-8617 Mönchaltorf F – 67870 Bischoffsheim Switzerland France Tel. +33-388 48 64 50 Tel. +41-44 949 40 50 www.KRAFTWERKtools.com...