Description Of The Tumble Dryer; Control Panel - Hotpoint TVFS 83 Instruction Booklet

Description
of the tumble dryer
Front side

Control panel

Serial number
and model
number
Control panel
The ON/OFF button : If the dryer is running and this
button is pressed and held for more that 3 seconds the
dryer is turned off, the programme is then cancelled.
Press and hold for more than 3 seconds and the dryer
reactivates.
The PROGRAMMES knob sets the programme: rotate it
until the indicator is pointing to the programme you want to
select or to Timed Drying (see Start and Programmes).
The OPTION buttons/lights select available options for
your selected programme. The lights indicate that the
option has been selected (see Start and Programmes).
The START/PAUSE button/light
programme. When you press this button there will be
one beep and the progress lights will flash to confirm
the action. When a programme is running, pressing this
button in pauses the programme and stops the dryer. The
light is green when programme is running, flashing amber
Drum
Filter
PROGRAMMES
Knob
ON/OFF
Button
starts a selected
Rear side
Rating Plate
Caution, high
temperature
Indicator
Progress or Delay
OPTION
Buttons & Lights
if the programme has been paused or flashing green if
on standby waiting to start a programme (see Start and
Programmes).
Note: This light also flashes amber during the Post
Care phase of a programme.
The Progress or Delay lights show you the status of the
programme, or the delay time when they flash. During a
delayed start the lights flash to show the delay selected.
When (not flashing) they show each stage of the
programme by the corresponding light turning on (see Start
and Programmes).
The Clean Filter light gives you a reminder before every
programme that it is essential to clean the filter every time
the dryer is used (see Maintenance and Care).
Air inlet
Connection for
ventilation hose
Clean Filter
Light
START/PAUSE
Lights Button & Light
GB
7