Power Mode Switch - di-GPS N1 User Manual

Note
•
N1 di-GPS cannot be turned on when the camera are not connected.
•
Please refer to user manual of your DSLR for more information on taking
photographs with a GPS.
•
Be sure to turn off your camera before disconnecting the N1 di-GPS. Do not
connect or disconnect the N1 di-GPS while the camera is on. Failure to
observe this precaution could cause a malfunction of the camera.
•
Do not carry the camera by the N1 di-GPS or subject the camera or cord to
physical shocks while the cord is connected. Failure to observe this
precaution could result in physical damage of the cord.
•
Re-place the caps on the camera when the terminals are not in use.

Power Mode Switch

Power mode switch set to "On"
The N1 di-GPS will remain on whatever the camera is turned on and off. The
N1 di-GPS will continue to receive and track all satellites and provides instant
location information to camera.
Power mode switch set to "Auto"
The N1 di-GPS will turn on when the camera is turned on and it will be turned
off when the camera is turned off. The N1 di-GPS will start looking for the
satellites after the camera turn on. It may take a few seconds to few minutes
to have the first position fixed, depends on the visibility of the satellites.
Status LED indicator for N1 di-GPS fix or not fix
LED OFF :
LED Flashing :
LED ON :
GPS Icon on DSLR camera indicator for N1 di-GPS fix or not
fix
No GPS icon display
GPS icon Flashing
GPS icon displayed
LED on the N1 di-GPS will only represent the status of N1 di-GPS but not the
reception of GPS data to the DSLR camera.
GPS data are only recorded when the
panel of the DSLR camera. Please make sure that the
before shooting.
Nikon D2HS, D2X and D200 are registered trademark or a trademark of NIKON CORPORATION in the United States
and/or other countries.
Canon and EOS are registered trademark or a trademark of Canon Inc. in the United States and/or other countries.
Products and brand names are trademarks or registered trademarks of their respective companies.
Receiver switch off / DSLR camera not connected
No fixed, Signal searching
Position Fixed
: N1 di-GPS not connected
: Not fixed. Signal searching
: Position fixed. Current location information
will be recorded in the image files.
GPS icon displayed in the top LCD
GPS icon is displayed
V1.0a
7