D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 58

DGS-3324SRi:4#show snmp traps
Command: show snmp traps
SNMP Traps
Authenticate Traps : Enabled
DGS-3324SRi:4#
disable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To prevent SNMP traps from being sent from the Switch:
DGS-3324SRi:4#disable snmp traps
Command: disable snmp traps
Success.
DGS-3324SRi:4#
disable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable the SNMP authentication trap support:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
: Enabled
Used to disable SNMP trap support on the Switch.
disable snmp traps
This command is used to disable SNMP trap support on the
Switch.
None.
Only administrator-level users can issue this command.
Used to disable SNMP authentication trap support.
disable snmp authenticate_traps
This command is used to disable SNMP authentication support on
the Switch.
None.
Only administrator-level users can issue this command.
50