D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 328

DGS-3324SRi:4#show ospf aggregation
Command: show ospf aggregation
OSPF Area Aggregation Settings
Area ID
------------ ---------------------
10.1.1.1
10.1.1.1
Total Entries: 2
DGS-3324SRi:4#
show ospf lsdb
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the link state database of OSPF:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Aggregated
Network Address Type
10.0.0.0/8
20.2.0.0/16
Used to display the OSPF Link State Database (LSDB).
show ospf lsdb {area_id <area_id> | advertise_router
<ipaddr> | type [rtrlink | netlink | summary | assummary |
asextlink]}
This command will display the current OSPF Link State Database
(LSDB).
area_id <area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
advertise_router <ipaddr> − The router ID of the advertising router.
type [rtrlink | netlink | summary | assummary | asextlink] − The type
of link.
None.
NOTE: When this command displays a "
LSDB table for the area_id or the Cost, this is interpreted as "no area ID"
for external LSAs, and as "no cost given" for the advertised link.
LSDB Advertise
-------------- -------------
Summary Enabled
Summary Enabled
*
" (a star symbol) in the OSPF
320