LG WD1408NCW Owner's Manual page 29

Temp.
The Temp. button selects the wash and rinse
temperature combination for the selected
programme. Press this button until the desired
setting is lit. All rinses use cold tap water.
• Select the water temperature suitable for the
type of load you are washing. Follow the
garment fabric care labels for best results. Not
all temperatures can be selected on all cycles.
Spin
• Spin speed level can be selected by pressing
the Spin button repeatedly. Higher spin
speeds may not be available on some cycles.
• Spin Only
1
Press the Power button.
2
Press the Spin button to select RPM.
3
Press the Start/Pause button.
NOTE
• When you select No, it will still rotate slowly
for a short time to drain quickly.
Rinse
Rinse+ ( )
Adds an additional rinse.
Add Item ( )
Laundry can be added or removed after the
washing programme is started.
1
Press the Add Item button when the LED is
turned on.
2
Add or remove laundry.
3
Close the door and Press the Start/Pause
button.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature is high. It
is not possible to add laundry during this time.
• If the water temperature in the drum is high,
wait until it cools down.
CAUTION
• When adding laundry, make sure to
completely push it into the drum. If laundry
gets stuck in the door latch hole, the rubber
packing may be damaged, causing water
leakage and malfunction.
• Forcing the door open may cause part
damage, destruction, or safety problems.
• when opening the door during a wash, caution
should be taken to avoid scalding or water
overflowing onto the floor.
EN
29