Installation; Before You Connect To The Network - D-Link DGS-2208 User Manual

Section 3 - Installation
This section will explain how to connect Ethernet devices to your new D-Link switch and how to mount the switch.
The site where you install the Switch may greatly affect its performance. Please follow these guidelines for setting up
the Switch.
• Install the Switch on a sturdy, level surface that can support at least 3 kg (6.6 lbs.) of weight. Do not place
heavy objects on the Switch.
• The power outlet should be within 1.82 meters (6 feet) of the Switch.
• Visually inspect the power cord and see that it is fully secured to the AC power port.
• Make sure that there is adequate space for proper heat dissipation from and adequate ventilation around
the Switch. Leave at least 10 cm (4 inches) of space at the front and rear of the Switch for ventilation.
• Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating
ranges.
• Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration,
dust, and direct exposure to sunlight.
• When installing the Switch on a level surface, attach the rubber feet to the bottom of the device. The
rubber feet cushion the Switch, protect the casing from scratches, and prevent it from scratching other
surfaces.
D-Link DGS-2208 User Manual

Installation

Before You Connect to the Network

16