Your New Monitor; Connecting Your Monitor - Samsung SyncMaster 610b Owner's Instructions Manual

610bMonitor 7/21/98 3:35 PM
3

Your New Monitor

Please make sure the following items are included with your monitor. If any items are miss-
ing, contact your dealer.
Monitor & stand

Connecting Your Monitor

4
1 Turn off your computer and unplug the
power cord.
Video port
2
Connect the signal cable (with an
adapter if necessary) to the video port
on the back of your computer, video
board, video card, or graphics card.
Signal cable
3
Connect the end of the signal cable to
your computer's video port. If you are
using a Macintosh computer, connect
the cable to a Macintosh adapter, and
set the pins on your adapter (adapter
not included). An IBM-compatible
computer does not need an adapter.
Power port
4
Connect the power cord for your
monitor to the power port on the back
of the monitor.
2
Page 2
This manual
Power cord
2
5
Power cords
5
Plug the power cord for the monitor
and the power cord for your computer
into a nearby outlet.
6 Turn on your computer and monitor. If
your monitor displays an image,
installation is complete.
To install the monitor driver on your PC:
1. Insert the provided diskette into the A drive.
2. Double click the "install.exe" file.
Driver installation diskette
Warranty card
(not available in all locations)
3