Please make sure the following items are included with your monitor. If any items are
missing, contact your dealer.
Manual
Stand
Connecting Your Monitor
3
1
Turn off your computer and unplug
the power cord.
2
Signal cable
Connect the end of the signal cable to
your computer's video port (Video
board, video card, or graphics card).
If you are using a Macintosh
computer, connect the cable to a
Macintosh adapter, and set the pins
on your adapter (Adapter not
included). A PC-compatible computer
does not need an adapter.
3
Power port
Connect the power cord for your
monitor to the power port on the back
of the monitor.
Your New Monitor
EXIT
EXIT
Monitor
English - 2
MENU
MENU
MENU
(Not available in all locations)
2
4
Power cords
Plug the power cord for the monitor
and the power cord for your computer
into a nearby outlet.
5
Turn on your computer and monitor.
If your monitor displays an image,
installation is complete.
6
Install monitor driver
•
Insert the provided diskette into the
A drive.
•
Double click the "install.exe" file.
Driver
Installation Diskette
Power Cord
Warranty card
4