Table of Contents
Advertisement
Using the Split function
You can select different sounds for the lower and upper
ranges of the keyboard. This is called the Split function.
1. Press the Split switch.
The Split switch indicator will light.
The upper range will continue to play the selected
sound.
The lower range will play a Bass sound. To select a
sound other than Bass for the lower range, see step 3
below.
If you press the Split switch while you were using
the Layer function, the sound selected for Layer 1
will be assigned to the upper range.
2. To change the split point, hold down the Split
switch and press the desired note.
The note you pressed will become the split point, and
will be part of the upper range.
Split point
Lower range
+
3. Selecting sounds.
Upper range
Select a sound by pressing one of the sound selector
switches. The switch indicator will light.
Lower range
To select a sound other than Bass, hold down the
upper range sound selector switch, and press a
different sound selector switch to select a sound for
the lower range.
The sound selector switch indicators for both the
upper and lower sounds will light.
To return to the Bass sound, press the sound selector
switch that you had chosen for the lower range.
The lower range will return to the Bass sound.
However, this sound will now be selected for the
upper range, so you may need to re-select the sound
for the upper range.
4. To turn off the Split function, press the Split
switch.
The Split switch indicator will go dark.
To adjust the volume balance of the two sounds
You can adjust the volume balance of the two sounds
you selected.
1. Hold down the Transpose/Function switch, and
press the Harpsichord or the Pipe Organ sound
selector switches to adjust the volume balance.
Lower range
Hold down the Transpose/Function switch and
repeatedly press the Harpsichord sound selector
switch to increase the volume of the lower range.
Upper range
Hold down the Transpose/Function switch and
repeatedly press the Pipe Organ sound selector
switch to increase the volume of the upper range.
Lowest note of
upper range
Upper range
2. Use the Volume slider to adjust the overall
volume.
To change the octave of the two sounds
You can shift the pitch of each range (upper and lower)
up or down 1 octave.
Lower range
Hold down the Transpose/Function switch and press
the E.Organ sound selector switch to shift the pitch
down one octave.
Hold down the Transpose/Function switch and press
the Strings sound selector switch to shift the pitch up
one octave.
Upper range
Hold down the Touch switch and press the E.Organ
sound selector switch to shift the pitch down one
octave.
Hold down the Touch switch and press the Strings
sound selector switch to shift the pitch up one octave.
+
Increase the volume
Increase the volume
of the lower range
of the upper range
+
Lower the octave
Raise the octave
of the lower range
of the lower range
+
Lower the octave
Raise the octave
of the upper range
of the upper range
11
Advertisement
Table of Contents
