Getting To Know Your Appliance; The Control Panel; The Hotplates - Bosch PKM8DV1 Series Instruction Manual

Getting to know your appliance

en
*Getting to know your
appliance
T he instruction manual is the same for various different
G e t t i n g t o k n o w y o u r a p p l i a n c e
hobs. You can find the hob dimensions in the overview
of models. ~ Page 2

The control panel

Indica-
tors/sym-
bols
Heat settings
‚ - Š
Residual heat
• / œ
PowerBoost function
›
Keep-warm function
–©
Timer
‰‰
Wi-Fi
D
Controls with illuminated bars above the symbols
Main switch
#
PowerBoost function
á
Child safety lock
> Š
Wipe protection
Keep-warm function
Û
Combination heating element
à
Fan setting hood
:
Lighting hood
B
Control panel
1 û 2 û 3 û 4 û
Automatic zone control
ö
Sensor frying system
é
Kitchen timer
t
Timer
y
Stopwatch function
x
Controls without illuminated bars above the symbols
Hotplate selection
ø
6
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Notes
Depending on the operating condition of the hob the
■
controls which can currently be selected light up
brightly or dimmed. If you touch them, the relevant
function is activated.
The controls which cannot currently be selected do
■
not light up.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Do not pull pans close to the displays and sensors.
■
The electronics could overheat.

The hotplates

Hotplate Activating and deactivating
Single-circuit hot-
$
plate
Dual-circuit hotplate Select the hotplate and touch the
ð
symbol
When the hotplate is activated: the corresponding indicator lights up
Notes
Any dark areas in the glow pattern of the hotplate
■
are due to technical reasons. The function of the
hotplate is not affected.
Hotplate temperature is regulated by the heat
■
switching on and off.The heat may also switch on
and off at the highest setting.
This ensures e.g.:
– sensitive components are protected from
overheating
– the appliance is protected from electrical
overload
– better cooking results are achieved
With multi-circuit hotplates the heater elements of the
■
inner filament circuits and the heater element of the
activations may switch on and off at different times.
ö