Table of Contents
Advertisement
Home Connect
en
Touch the
symbol repeatedly until
t
2.
displayed alternately.
lights up in the cooking position display.
‚
Set the
‹
value on the control panel.
3.
WLAN is deactivated and the
panel goes out.
Disconnecting from the network
Y ou can disconnect your hob from the network at any
D i s c o n n e c t i n g f r o m t h e n e t w o r k
time.
If your hob is disconnected from the network, it is
Note:
not possible to operate it using Home Connect.
Touch the
symbol for 4 seconds.
t
1.
Product information will be displayed.
Touch the
symbol repeatedly until
t
2.
displayed alternately.
lights up in the cooking position display.
„
Set the
value on the control panel.
‹
3.
The appliance is disconnected from the home network
and the
symbol on the control panel goes out.
D
Connecting to the network
Touch the
symbol for 4 seconds.
t
1 .
C o n n e c t i n g t o t h e n e t w o r k
Product information will be displayed.
Touch the
symbol repeatedly until
t
2.
displayed alternately.
lights up in the cooking position display.
‹
On the control panel
3.
set the "Connect automatically"
or the "Connect manually"
Follow the instructions in the section entitled
4.
"Automatic registration in the home network" or
"Manual registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
■
The app must be open and be set up.
■
16
and
are
•'
„
symbol on the control
D
and
are
•'
‚
and
are
•'
‚
value or
‚
value.
ƒ
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
If your extractor hood is directly connected, first
■
disconnect the hob from your home network and
then initiate the connection process
again.~ "Disconnecting from the network"
on page 16~ "Connecting to the network"
on page 16
Touch the
symbol for 4 seconds.
t
1.
The product information will be displayed.
Touch the
symbol repeatedly until
t
2.
displayed alternately.
will be lit on the hotplate display.
‹
Set the value
in the settings area.
‚
3.
Follow the instructions in the app to complete the
4.
connection process.
Settings via app
Using the Home Connect app, you can easily access
the basic settings for your hob and send settings for the
cooking positions to the hob.
Notes
To change basic settings the hob must be switched
■
off.
Operation on the appliance always has priority.
■
During this time, it is not possible to operate the
appliance using the Home Connect app.
The transfer of settings is activated when the
■
appliance is supplied.
If the transfer of settings has been deactivated, only
■
the hob's operating statuses will be displayed in the
Home Connect app.
Touch the
symbol for 4 seconds.
t
1.
Product information will be displayed.
Touch the
t
symbol repeatedly until
2.
displayed alternately.
To activate the transfer, select the
3.
control panel; to deactivate the transfer, select the
value.
and
are
•'
ƒ
•'
and
...
are
value on the
‚
‹
Advertisement
Table of Contents
