Dubbing Files To A Disc By Connecting To A Blu-Ray Recorder - JVC Everio R GZ-R470 Detailed User Manual

Copying
Dubbing Files to a Disc by Connecting to a
Blu-ray Recorder
You can dub videos in the high definition quality by connecting an AVCHD-
compliant Blu-ray recorder to this unit via a USB cable. For details on creating
the disc, refer to the instruction manual of your Blu-ray recorder.
This operation cannot be completed if the remaining battery power is not
0
enough. Charge the battery fully first.
1
Open the terminal cover.
2
Connect to a Blu-ray recorder.
Connect using the USB cable provided with this unit.
0
Before making any connection, close the LCD monitor to turn off this
0
unit.
USB Cable
USB
(Provided)
.
3
Open the LCD monitor.
.
This unit turns on and the "SELECT DEVICE" screen appears.
0
4
Tap "CONNECT TO OTHER".
SELECT DEVICE
SELECT DEVICE
TYPE TO CONNECT
.
88
USB
Blu-ray Recorder
CONNECT TO OTHER
5
Tap the desired media.
CONNECT TO OTHER
SELECT MEDIA TO OPEN
BUILT-IN MEMORY
.
The following screen is displayed after the camera operation is
0
completed.
CONNECT TO OTHER
SD CARD
.
Operations are to be performed on the Blu-ray recorder after the
0
screen switches.
6
Perform dubbing on the Blu-ray recorder.
Refer also to the instruction manual of the Blu-ray recorder.
0
After dubbing is complete, close the LCD monitor of this unit and
0
check that the POWER/ACCESS lamp goes off before disconnecting
the USB cable. Operations cannot be performed on this unit until the
USB cable is disconnected.
SD CARD