Table of Contents
Advertisement
VIVOTEK
7.29 Event setting
Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
di
304 - User's Manual
VALUE
SECURITY
(get/set)
string[40]
6/6
0, 1
6/6
0, 1, 2
6/6
1~999
6/6
boot,
6/6
di,
pir,
motion,
seq,
recnotify,
tampering,
vi,
volalarm,
visignal,
vadp,
smartsd
<product dependent>
string[40]
6/6
0,<positive integer>
6/6
DESCRIPTION
Identification of this entry.
Enable or disable this event.
Indicate the priority of this event:
"0"= low priority
"1"= normal priority
"2"= high priority
Delay in seconds before detecting the next
event.
Indicate the trigger condition:
"boot" = System boot.
"di"= Digital input.
"pir"= PIR detection.
"motion" = Video motion detection.
"seq" = Periodic condition.
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger).
"volalarm"= Audio detection.
"smartsd"= Lifetime detection of SD card.
"shockalarm" = Shock detection.
"virestore" = Video input signal restore.
The status for event trigger
Indicate the source id of di trigger.
This field is required when trigger condition is
"di".
One bit represents one digital input. The LSB
indicates DI 0.
* Only available when "capability_ndi" > 0
Advertisement
Table of Contents
