freeze
<product dependent>
deinterlace_enable
deinterlace_mode
xoffset
yoffset
lens_alignment
profile_i<0~(m-1)>_enable
profile_i<0~(m-1)>_policy
<boolean>
4/4
<boolean>
4/4
spatial,blend
4/4
0~100
4/4
0~100
4/4
0~100
4/4
<boolean>
4/4
night,
4/4
schedule
Enable/disable Image freeze while patrolling.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_freeze" is 1
Enable/disable deinterlace function.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_deinterlace_s
upport" is 1.
Users can choose between two different
deinterlacing techniques:
Spatical mode provides the best image quality,
while Blend mode provides better image
quality (than not using the deinterlace function
at all).
* Only available when
"capability_image_c<0~(n-1)>_deinterlace_s
upport" is 1.
Adjusting the image to proper position
horizontally.
* Only available when the bit 4 of
capability_image_c<0~(n-1)>_basicsetting is
1.
Adjusting the image to proper position
vertically.
* Only available when the bit 5 of
capability_image_c<0~(n-1)>_basicsetting is
1.
Stitch the sensors together into focused
position.
* Only available when
"capability_image_c<0~(n-1)>_lens_alignme
nt" is 1.
Enable/disable this profile setting
The mode which the profile is applied to.
* Not support "policy=day" anymore when the
VIVOTEK
User's Manual - 219