Mira Azora Installation And User Manual page 17

10.
Turn control to full cold.
13.
Set control to 'III'.
15.
Adjust temperature as required.
Flow rate will adjust automatically.
17.
Isolate power.
Note: A slight hissing sound may be heard from the Mira Escape during
operation. High mains water pressure and high shower temperatures will
affect the tone. This is quite normal in use.
11.
Set control to 'II'.
14.
5 - 10 Secs
The temperature will rise further.
16.
Press STOP.
18.
0 - 5 Secs
The shower will purge
water from its tank for a
few seconds.
17
12.
0 - 10 Secs
The temperature will rise
slightly.
+
_
19.
Residual water may drain
over a few minutes.
1062243-W2-N
+
_