Faq - TP-Link TL-WA855RE User Manual

300mbps wi-fi range extender
Hide thumbs Also See for TL-WA855RE:
Table of Contents

Advertisement

FAQ

Q1 How to reset the extender to its factory default settings?
• With the extender powered on, use a pin to press the
• Log in to the extender's web management page. Go to
Restore
and click
Q2 What can I do if I forgot my login password?
Refer to FAQ > Q1 to reset the extender, and create a password to log in.
Note:
The extender must be reconfigured after a reset to access internet. Please note down your login password
for future use.
Q3 What can I do if I forgot my wireless password?
The factory default wireless password is printed on the label of the extender.
If the password has been altered, please connect your computer to the extender using
an Ethernet cable and follow the steps below:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to
Settings
>
password.
Q4 What can I do if I cannot access the web management page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer is connected to the extended network.
• Make sure your computer is configured as
Obtain DNS server address
• Use the IP address to access the extender. The default IP is 192.168.0.254. If the
extender is connected to the router, you should go to your router's DHCP client list to
obtain the extender's current IP address.
• Reset the extender. Then connect your computer to its wireless network, enter
http://tplinkrepeater.net
Q5 I enabled wireless MAC filter, wireless access control, or access
control list (ACL) on my router, what should I do to configure and use
the extender?
When a device connects through the extender to your router, the MAC address of the
device shown on the router is translated to another MAC address. If your router's MAC
filter, wireless access control, or ACL is enabled, the devices connected to the extender
cannot get an IP address from the extender and cannot access internet.
Factory
Restore.
Wireless
>
Wireless Settings
automatically.
or
http://192.168.0.254
RESET
button for 1 second.
System Tools
to retrieve or reset your wireless
Obtain an IP address automatically
in the web browser and press Enter.
>
Backup &
and
29

Advertisement

Table of Contents
loading

Table of Contents