Appendix; Sensor Confi Guration And Test Screens - AAON Orion ASM01819 Technical Manual

APPENDIX

Sensor Confi guration and Test Screens
Sensor Confi guration and Test
Screens
To access the Sensor Confi guration & Test Screens, you fi rst need to
access the Unit Information Screen by touching
the Main Display Screen.
NOTE: While in the Sensor Confi guration & Test Screens, the
<Display>
button functions as an exit key to return to the
previous screen or menu. After a few seconds, however,
the sensor will automatically revert to the Main Display
Screen. Refer to Figure 11 when reading the instructions
that follow.
Display
Button
Display
Touch
Here
Figure 11: E-BUS Digital Room Sensor Buttons
Sensor Confi guration & Test Screen
Figure 12: Sensor
Confi guration & Test
Screen
10
<Display>
while at
Override
Button
Override
Touch
Here
While the Unit Information
Screen is being displayed, you
can enter the Sensor Confi gura-
tion & Test Screen options by
touching simultaneously below
<Display> <Over-
the and
ride>
buttons. (See Figure 11
which shows where to touch to
access this option.)
E-BUS Digital Room Sensor Technical Guide
Pixel Test Screen
Figure 13: Sensor Info &
LED Test Screen
Sensor Info & LED Test Screen
Figure 14: Sensor Info &
LED Test Screen
To select the first option—
Pixels—touch <> while at
the Sensor Configuration &
Test Screen (Figure 12). The
Pixel Test Screen tests the pixels
of the LCD display, allowing
you to make the screen white
with black characters, black
with white characters, or a
black or white screen. To exit
<Display>
this screen, touch
To select the second option—
Info & LEDS—touch < >
while at the Sensor Confi gura-
tion & Test Screen (Figure 12).
The Sensor Info & LED Test
Screen shows the version of
software that the sensor is run-
ning and allows you to test the
LEDs that are used on the con-
troller. Touching <> will turn
the LEDs on and touching <>
will turn the LEDs off . To exit
<Display>
this screen, touch
.
.