Related Manuals for D-Link DES-1009G
Summary of Contents for D-Link DES-1009G
- Page 1 DES-1009G 8-Port 10/100M with 1-Port 10/100/1000M Gigabit Ethernet Switch User’s Guide Rev.02 (Oct. 2004) 6012-9600090 Printed In Taiwan RECYCLABLE...
- Page 2 L I M I T E D W A R R A N T Y D-Link Systems, Inc. (“D-Link”) provides this limited warranty for its product only to the person or entity who originally purchased the product from D-Link or its authorized reseller or distributor.
- Page 3 D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or of an identical make, model or part; D-Link may in its discretion may replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
- Page 4 RMA number must be prominently marked on the outside of the package. The packaged product shall be insured and shipped to D-Link, 1759 5 Mt. Herrmann, Fountain Valley, CA 92708 with all shipping costs prepaid. D-Link may reject or return any product...
- Page 5 OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF...
- Page 6 ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON- CONFORMING PRODUCT.
-
Page 7: Copyright Statement
Trademarks Copyright 1999 D-Link Corporation. Contents subject to change without prior notice. D- Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as... -
Page 8: Table Of Contents
ABLE OF ONTENTS ABOUT THIS GUIDE...1 ...1 ERMS VERVIEW OF THIS INTRODUCTION...2 IGABIT THERNET THERNET WITCHING ECHNOLOGY ...5 EATURES Ports ...5 Performance features ...5 UNPACKING AND SETUP ...6 ...6 NPACKING ...7 ETUP ESKTOP OR HELF ONNECTING ETWORK ...8 OWER ON IDENTIFYING EXTERNAL COMPONENTS...9 ...9 RONT... -
Page 9: About This Guide
BOUT This user’s guide tells you how to install your DES-1009G Gigabit Ethernet Switch, and how to connect it to your network. Terms For simplicity, this documentation uses the terms “Switch” (first letter upper case) to refer to the DES-1009G Gigabit Ethernet Switch, and “switch”... -
Page 10: Introduction
NTRODUCTION This section describes the features of the DES-1009G Gigabit Ethernet Switch, as well as giving some background information about Gigabit Ethernet, Fast Ethernet and Switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing... -
Page 11: Fast Ethernet Technology
In addition, the phenomenal bandwidth delivered by Gigabit Ethernet is the most cost-effective method to take advantage of today and tomorrow’s rapidly improving switching and routing internetworking technologies. And with expected advances in the coming years in silicon technology and digital signal processing that will enable Gigabit Ethernet to eventually operate over unshielded twisted-pair (UTP) cabling, outfitting your network with a powerful 1000-Mbps-capable backbone/server connection... -
Page 12: Switching Technology
LAN segments. Switching is a cost-effective way of increasing the total network capacity available to users on a local area network. A switch increases capacity and decreases network loading by making it possible for a local area network to be divided into different segments which don’t compete with each other for network... -
Page 13: Features
Features The DES-1009G Gigabit Ethernet Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. Switch features include: Ports ♦ One 10/100/1000Mbps NWay Gigabit Ethernet port (port 9). -
Page 14: Unpacking And Setup
This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: ♦ One 8-Port 10/100 Mbps, 1-Port 10/100/1000Mbps NWay Gigabit Ethernet Switch ♦... -
Page 15: Setup
Switch. Desktop or Shelf Installation When installing the Switch on a desktop or shelf, the rubber feet included with the device must be first attached. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the device and the objects around it. -
Page 16: Connecting Network Cable
Power on The DES-1009G Gigabit Ethernet Switch can be used with AC power sources 100 - 240 VAC, 50 - 60 Hz. The Switch’s power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected. -
Page 17: Identifying External Components
Ethernet ports, 1 10/100/1000Mbps NWay Gigabit Ethernet port, and LED indicators. Figure 3-1. Front panel view of the DES-1009G Gigabit Ethernet Switch ♦ One 10/100/1000Mbps NWay Gigabit Ethernet port (port 9). ♦ Eight 10/100Mbps NWay Ethernet ports (port 1 ~ 8). -
Page 18: Rear Panel
The rear panel of the Switch consists of an AC power connector. The following shows the rear panel of the Switch. Figure 3-2. Rear panel view of the DES-1009G Gigabit Ethernet Switch ♦ AC Power Connector This is a three-pronged connector that supports the power cord. -
Page 19: Led Indicators
LED indicators for the Switch along with an explanation of each indicator. Figure 3-4. The DES-1009G Gigabit Ethernet Switch LED indicators ♦ POWER: After turning on the power, the Power indicator on the front panel should light to indicate the Switch is receiving power. - Page 20 Switch. ♦ SMTP: When this indicator is blinking green, the SMTP packets (E-Mail) are transmitting or received on the Switch. ♦ SPEED: The indicator lights amber when the port is connected to 1000Mbps Gigabit Ethernet station, and the indicator lights green when the port is connected to 100Mbps Fast Ethernet station.
-
Page 21: Technical Specifications
ECHNICAL IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet Standards: IEEE 802.3ab 1000BASE-T Gigabit Ethernet ANSI/IEEE 802.3 NWay Auto-negotiation IEEE 802.3x Full duplex Flow Control Protocol: CSMA/CD Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex) Data Transfer Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex) Rate: Gigabit Ethernet: 1000Mbps (half-duplex), 2000Mbps (full-duplex) Topology... -
Page 22: Physical And Environmental
Physical and Environmental AC inputs: Power Consumption: Operating Temperature: Storage Temperature: Humidity: Dimensions: EMI: Safety: Transmission Method: RAM Buffer: Filtering Address Table: Packet Filtering/Forwarding Rate: MAC Address Learning: 100 – 240 VAC, 50/60 Hz (internal universal power supply) 30 watts maximum 0 ~ 50 degrees Celsius -5 ~ 55 degree Celsius 5% ~ 95% RH, non-condensing...