Advertisement
1
Reference the washbasin
specification and furniture
specification (page 1) to
establish the height and
spacing of the mounting bolts.
5
When mounting the washbasin
into a wood stud wall, there
must be adequate bracing. We
recommend doubling up 2 x 6'
or 2 x 8's between the studs to
form a solid anchoring point.
Screw mounting bolts into the
predrilled holes with an
adjustable wrench. Screw in
the full length of the mounting
bolt, so that the lag thread is
no longer visible. Carefully slide
washbasin onto the mounting
bolts. Insert the white plastic
sleeve over bolt and into the
hole in the washbasin.
Install provided washer and nut.
Hand tighten the nut,
so the washbasin is secure.
MAL_Delos_DL6321/15.04.1
2
Using the appropriate bit for the
wall material, drill pilot holes.
6
Install the faucet and siphon.
3
The plastic anchors provided
are for concrete wall
applications.
7
remove the vanity drawer.
4
For wood stud walls, bolts
should be screwed into wood
backing.
8
Push and lock in pins (1) and
remove the drawer. (2)
Advertisement
