D-Link DCS-950G Quick Installation Manual page 9

Configuring Your Camera with the
Setup Wizard (continued)
The Connection Mode depends on
how your camera is connected to your
network. Click Infrastructure for use
with a router or Adhoc for a peer-to-
peer connection. The Network
Name, Wireless Channel, Security
Mode and Authentication MUST
correspond with your wireless network
settings for the camera to work.
Click Next.
Enter the Encryption Mode, Key
Format, and Encryption Keys for you
wireless network. Click Next.
Click Next.
If you need to make any changes, click
Back to modify your camera settings.
Otherwise, click Restart to save and
apply your settings. This may take a
few minutes.
Click Restart.
9