D-Link SECURICAM Network DCS-5300G Manual page 53

Using the DCS-5300G with an Internet
browser (continued)
Configuration > Advanced >Camera Control
Click the Camera Control button from the Configuration screen to access
settings that affect how the DCS-5300G Internet Camera can pan and move to
preset locations.
Click Camera Control
Pan Speed-
Tilt Speed-
Auto Pan/Patrol Speed-
Select the speed at which the camera will pan for a
full cycle from the pull down menu. Select a value
between -5 and +5, -5 being the slowest setting.
Select the speed at which the camera will tilt for a
full cycle from the pull down menu. Select a value
between -5 and +5, -5 being the slowest setting.
Select the speed at which the camera will pan during
auto patrol. Select a value between 1 and 5, 1 being
the slowest setting.
53