Reset To Default - D-Link SECURICAM Network DCS-3220G Manual

Installation Wizard Screen (continued)
The upgrade window allows users
to upload a saved firmware file. If
the firmware is older than that
currently on the camera, a screen
will appear indicating so and
prompting the user to confirm the
upload.
Package Information -
This displays information about the
firmware and plugin currently
installed on the camera.
Upgrade -
Locate the Firmware to Upgrade -
Indicate the location of the firmware to be uploaded to the camera.
Selected Package -
This displays the file name of the firmware selected for upload.

Reset to Default -

Click the Reset to Default tab to reset the camera's settings to factory defaults.
About -
Click About to display the current
version and date.
Exit -
Click the Exit tab to exit the Installation Wizard screen.
16