D-Link SECURICAM Network DCS-3220G Manual page 87

Using IP surveillance Software (continued)
Monitor Program (continued)
Selected Channel
Recording
Connected and monitoring
If you do not want to monitor one video, you can drag and drop the video (in the
video area) to the trashcan in the common control area of the monitor program.
The following section will demonstrate the procedures for "drag and drop" step-
by-step.
Show the video of a specified channel
This section depicts the method of how to show the video of a specific channel
in a display window.
Step 1: Move the mouse cursor to the display window shown below
Mouse cursor
Location hint
5
9
13
Video 1
87
Not configured channel
Configured but not
connected (no video)
Trashcan
.
Display window