ActionTec PK-5000 User Manual page 38

4. Enable Public/Private
addressing for the
IP
configured to the
public addresses statically assigned.
IP
5. Select the
DNS
address and, optionally, the secondary
boxes.
6. Select Dialout on-demand (optional). To have the Gateway automatically
connect to the Internet whenever needed (when a Web browser is opened,
check box. When Dialout on-demand is activated, the user can also set the
Gateway to disconnect from the Internet after a certain amount of idle time
(no Internet activity). To do this, enter the number of idle time minutes
(minimum 2 minutes) before disconnection occurs in the text box before
7.
settings (optional). Enter the maximum transmission unit (
MTU
value (in bytes) in this text box. This value corresponds to the largest physical
packet size the network is allowed to transmit. Packets larger than this size are
divided into smaller packets. It is recommended to leave this value set at the
default (1492).
When finished in this screen, click Apply to activate any changes made.
Chapter 5 Configuring Advanced Settings
IP
, allowing both public and private
simultaneously, while the
type. If static
DNS
IP
address was selected, enter the primary
address in the appropriate text
DNS
37
for private
addressing to be
IP
server is reserved for
addresses must have the
DNS
)
MTU