BenQ MH5005 User Manual page 34

Display
There are several options to set the image's aspect ratio depending on your input
signal source.
• Auto: Scales an image proportionally to fit the
• Real: Projects an image as its original resolution
Aspect Ratio
• 4:3: Scales an image so that it is displayed in the
• 16:9: Scales an image so that it is displayed in
• 16:10: Scales an image so that it is displayed in
Keystone Corrects any keystoning of the image. See
Auto Vertical When selecting Auto Vertical Keystone, projector image will automatically adjust
the keystone.
Keystone
Adjusts the image size and focus and check that the
projected image is free from distortion.
Test Pattern
•
PC &
Component
• H. Size: Adjusts the horizontal width of the image.
YPbPr Tuning
Displays the position adjustment page. To move the projected image, use the
Position directional arrow keys. This function is only available when a PC signal (analog RGB)
is selected.
34 Menu operation
projector's native resolution in its horizontal or
vertical width.
and resizes it to fit within the display area. For
input signals with lower resolutions, the
projected image will be displayed in its original
size.
center of the screen with a 4:3 aspect ratio.
the center of the screen with a 16:9 aspect ratio.
the center of the screen with a 16:10 aspect
ratio.
Phase: Adjusts the clock phase to reduce image
distortion. This function is only available when a PC
signal (analog RGB) or YPbPr signal is selected.
This function is only available when a PC signal (analog RGB) or YPbPr signal is
selected.
15:9 picture
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture
Correcting keystone on page 16.