D-Link DSL-504T User Manual page 26

DSL-504T User's Manual
Windows ME
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to Settings, and then
click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the Network
icon, and then select Properties.
4. The Network Properties dialog box displays with a list of currently installed
network components. If the list includes Internet Protocol (TCP/IP), then the
protocol has already been enabled. Skip ahead to Configure Windows ME for
DHCP.
5. If Internet Protocol (TCP/IP) does not display as an installed component, click
Add.
6. In the Select Network Component Type dialog box, select Protocol, and
then click Add.
7. Select Microsoft in the Manufacturers box.
8. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click
OK.
9. You may be prompted to install files from your Windows Me installation CD or
other media. Follow the instructions to install the files.
10. If prompted, click OK to restart your computer with the new settings.
Configure Windows ME for DHCP
1. In the Control Panel, double-click the Network and Dial-up Connections
icon.
2. In the Network and Dial-up Connections window, right-click the Network
icon, and then select Properties.
3. In the Network Properties dialog box, select TCP/IP, and then click
Properties.
4. In the TCP/IP Settings dialog box, click the Obtain and IP address
automatically option.
5. Double-click OK twice to confirm and save your changes, and then close the
Control Panel.
Your computer is now ready to use the Router's DHCP server.
D-Link Systems, Inc.
Basic Router Configuration
26