D-Link DCS-1000 Installation Manual page 5

Configuring the Internet Camera
Using your favorite web browser, type "http://192.168.0.20" in the address
box (the default IP address is 192.168.0.20)
The Welcome screen of the Internet Camera will appear. Click "System
Administration" to access and change system settings.
In the "Computer Name" field, type a name of your choosing that relates to
the camera or its location.
In the "Location" field, type a description of your choosing.
In the "Admin" field, type a username that will be used as the Administrator
account. We highly recommend that you change this setting now to enable
the highest security for the camera.
Type a unique Admin Password into the "Admin Password" and "Confirm
Password" fields.
In the Manually Assign section, input the correct settings for this camera into
the "IP Address",
are not sure what these settings should be, please contact your network
adminstrator to determine the correct settings.
The Default Gateway is the IP address of your Router. This setting allows
the Internet Camera to be seen from the public Internet.
Next, type in the "DNS IP Address" of your Domain Name System servers
into the cooresponding fields. These settings will be detirmined by your ISP.
(DCS-1000W Only) The Wireless Interface section detirmines the 802.11b
Wireless configureation. Please enter correct values into the cooresponding
fields. These settings need to match the settings used by your wireless access
point when used in Infrastrucure mode, or your client PC when used in ad-
hoc mode. Refer to the Manual for more information
In the LED Control Settings section, choosing one of the following:
§
Normal: Lights operate normally.
§
OFF: Lights will stay off.
§
Dummy: Lights will operate randomly.
"Subnet Mask" and "Default Gateway" fields. If you
5
Press Enter.