Table of Contents
Advertisement
2
9.8 The inlet hose filter and
the valve filter
It could be necessary to clean the filters
when:
• The appliance does not fill with water.
• The appliance fills with the water for a
long time.
To clean the water inlet filters:
1
7.
Make sure that the impeller of the
pump can turn. If this does not oc-
cur, contact the service centre.
8.
Clean the filter under the water tap
and put it back in the pump into the
special guides.
9.
Make sure that you tighten correctly
the filter to prevent leakages.
10.
Close the drain pump door.
• The indicator of button
the display shows the related alarm.
Refer to 'Troubleshooting'.
WARNING!
Disconnect the mains plug from
the mains socket.
1.
Close the water tap.
2.
Remove the water inlet hose from
the water tap.
3.
Clean the filter in the inlet hose with
a stiff brush.
ENGLISH
21
4
flashes and
Advertisement
Table of Contents
