Table of Contents
Advertisement
Salt and rinse aid warning lights (8)
When the dishwasher salt or rinse aid begins to run out, the warning
light will illuminate to advise that it needs refilling.
End of programme light (8)
When the programme is complete, the dishwasher will emit five beeps
and the end of programme indicator light will illuminate.
Please note: You should ensure that there are no dishes in the
upper basket when running a lower basket half-load programme,
and none in the lower basket when running an upper basket half-
load programme.
If you have selected any extra function (3 in 1, prewash, half-load)
for a programme, this function will automatically be selected the
next time the dishwasher is used. To cancel the selection of any
extra function, press the specific extra function button until the
indicator light for that function goes out.
Starting a programme
•
Press the Power button (the end of programme light will be
switched on)
•
Press the Programme Selection button until the required
programme is shown on the display.
•
If required, set the delay timer by pressing the Delay Timer button
•
Once a programme is selected, the end of programme light will
switch off.
•
When you close the dishwasher door, the programme will start
automatically.
9
Advertisement
Table of Contents
